Tessara Torch | Tall Marble & Copper Wall Sconce, 21.7 in

The Tessara Torch is the tall one. At 21.7 in it reads as a vertical stroke on the wall, which is what you want either side of a mirror or a bed where a short fixture would look lost. The shade is natural marble, and because marble is translucent it does not block the light but carries it, so the mineral veining inside shows as soft cloudy movement whenever the fixture is on.

Every shade is cut from quarried stone. The pattern and the depth of tone differ from one piece to the next, which is the point of the material and also the reason your piece will not match the photograph exactly. The body behind it is copper, finished either as copper or as black.

It sits 4.9 in off the wall, shallow enough for a corridor, and takes a G9 bulb, included and supplied at a warm 3000K, with a knob switch on the fixture. It is built for LED and is not dimmable, so run it from a standard wall switch. That is the temperature marble reads best at, since cooler light flattens the veining and makes the stone look grey. It wires directly into the wall on 110V-120V and is not rated for wet locations, so keep it clear of showers and tubs.

Dimensions

Specifications

• Shade: natural marble, veining varies per piece
• Body: copper, in a copper or black finish
• Dimensions: 4.7 in wide x 21.7 in high x 4.9 in deep (12 x 55 x 12.5 cm)
• Number of lights: 1
• Light source: G9, intended for an LED bulb
• Bulb included: Yes
• Color temperature: warm white 3000K
• Dimmable: no
• Switch: knob switch on the fixture
• Voltage: 110V-120V (US Household Standard)
• Mounting: wall mounted, wires into the wall, no assembly required
• Suggested coverage: about 32 to 54 sq ft (3 to 5 sq m)
• Location: indoor dry locations only, not rated for wet locations
• Other shapes in this family: Column 18.9 in, Long Tube 18.1 in, Loop Cylinder 13 in, Arched Cylinder 12.6 in, Lantern 11.8 in, Compact Cylinder 11.4 in